Staroma 3.0 is the SS316 Stainless Steel version of Taroma 3.0
Staroma 3.0 is the latest upgrade for our Staroma Series Injectors. Following the unbelievable success of our Staroma Lite Plus series, we've incorporated everything you liked about Staroma Lite Plus, in an enclosed format. No other enclosed model comes close to the sheer performance of Staroma 3.0
Staroma 3.0 uses 300++pcs of 3mm rubies. Begin operation at no more than 535F
Compared to the 2.0, the 3.0 utilizes less mass, lower operating temperatures, more rubies and a more open airflow. The 3.0 also has most of its rubies situated in "Heater Coil Zone"
Staroma 3.0 requires the same amount of Coil Stretch, as a Staroma Lite Plus. Coil needs to be stretched slightly longer than the Gemstone Chamber length, and then pushed back (like a spring) with the cap, for a good and tight fit.
Alternatively, you may also purchase a pre stretched coil here
The built in Gemstone Chamber acts as airflow control, and for better heat retention/recovery due to increased total mass. You can add or mix Aroma Pearls and/or pillars of different color and sizes, for endless combinations and possibilities. We only offer 3mm Ruby Aroma Pearls at the moment. Taroma is not designed to be used with an empty Gemstone Chamber. Do not attempt to overfill the Gemstone Chamber.
The Taroma housing is designed to fit an industry standard 20mm Heater Coil. These are common heater coils used in household appliances such as coffee machines etc. This is then plugged into the PID Controller. Together with the Qaromashop Adapter Bowl, Aroma Pearls, Stand and Coil Handle, your Taroma DIY Kit is now complete and ready for use.
Do not modify or use incompatible coils on Taroma. For reference, our Coil Pinout is:
Coil (Male 5 pin XLR connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+
Note: When resting the heater for a long time, the Taroma Stand will feel like touching a bowl of hot soup. However, it is safe to touch for a few seconds.
Each DIY Kit comes with:
1 x Staroma 3.0 SS316 Stainless Steel Housing
1 x Staroma Glass Adapter Deep/ Short/ Dimpled Short Bowl (14mm or 18mm or both)
Optional Staroma Ti Bowl (14mm or 18mm or both)
1 x 20mm Test Fitted Staroma Coil
1 x Staroma PID Controller with Plug (US or EU only)
1 x Staroma Coil Handle - Walnut StabWood Green/Blue (Please leave a comment during checkout or random color will be chosen)
1 x Staroma Suet Jade Porcelain Stand
2 x Pack 3mm Aroma Ruby Pearls
1 x Pack 17mm Stainless Steel screens
1 x Free Stainless Steel Scoop + Stirring tool
No warranties or returns.