Qaroma is our flagship model. A lot of time and effort has gone into the development of Qaroma. It is essentially a pure Quartz housing with a specially designed Gemstone Chamber. Qaroma has a 100% pure Quartz (no metal) airpath.
Qaroma is our most elaborate design. It is perfect for flavor/aroma chasers, who also appreciates the intricate design and aesthetic value of Qaroma. It is the only QaromaShop heater that is semi transparent, allowing partial view of the Gemstone Chamber. There is absolutely zero metal in its heater airpath. Perhaps the first of its kind.
Qaroma has a raised step in its design, to better stabilize and to provide better coil contact. As such, it is only compatible with 20mm, 5 wraps, clockwise coils.
Qaroma is also our most expensive housing, for a good reason. It is extremely complex to manufacture, requiring the coordination of multiple departments, senior level technicians, machines, processes and finishes. Every step has to be monitored and approved by Qaromashop, before it can be allowed to the next process.
The built in Gemstone Chamber acts as airflow control, and for better heat retention/recovery due to increased total mass. You can add or mix Aroma Pearls and/or pillars of different color and sizes, for endless combinations and possibilities. We only offer 3mm Ruby Aroma Pearls at the moment. Qaroma is not designed to be used with an empty Gemstone Chamber. Do not attempt to overfill the Gemstone Chamber.
The Qaroma housing is designed to fit an industry standard 20mm Heater Coil. These are common heater coils used in household appliances such as coffee machines etc. This is then plugged into the PID Controller. Together with the Adapter Bowl, Qaroma Aroma Pearls, Stand and Coil Handle, your Qaroma DIY Kit is now complete and ready for use.
Note: Qaroma is only warranted for Dead on Arrival (DOA) cases, reported within 24 hours of receipt, with proper evidence. Please take care of your Quartz products.
Do not modify or use modified/ incompatible coils on Qaroma. For reference, our Coil Pinout is:
Coil (Male 5 pin XLR connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+
Note: When resting the heater for a long time, the Qaroma Stand will feel like touching a bowl of hot soup. However, it is safe to touch for a few seconds.
The applications for Qaroma are endless. Anyone who requires small scale, ultra clean convection heating, at precise temperatures will benefit from the Qaroma. Due to its standard laboratory glass sizes, modifying the Qaroma to suit your needs is made very easy. There are truly no fixed way to use the Qaroma.
Each DIY Kit comes with:
1 x Qaroma Quartz Housing
1 x Qaroma Adapter Deep/Short Bowl (14mm or 18mm or both)
1 x 20mm Test Fitted Qaroma Coil
1 x Qaroma PID Controller with Plug (US or EU only)
1 x Qaroma Coil Handle - Beechwood in Dark Walnut
1 x Qaroma Suet Jade Porcelain Stand
1 x Pack 3mm Aroma Ruby Pearls
1 x Pack of 17mm Stainless Steel screens
1 x Free Stainless Steel Scoop + Stirring tool
No warranties or returns.